The key points that need to be paid attention to during the use of gas burner mainly include safety operation procedures, daily maintenance, troubleshooting and emergency handling. The following is the specific content according to the search results:

 Safety operation specification

Installation of gas burner

When installing the gas burner, it is essential to shut down the equipment and check for any potential safety hazards, such as gas leaks. Carefully read the installation manual and follow its instructions. After installation, inspect the burner's connections for looseness and ensure the gas pipes are clear. Use a foam detector to check for any gas leaks.

Use of gas burner

When using the gas burner, you must first check whether the gas pipeline interface is firm and conduct a safety check to confirm that it is safe before starting the equipment. When burning gas, do not put your hand into the gas burner or perform other dangerous operations. When the equipment is idle, turn off the gas and power supply in time.

Maintenance of gas burner

The maintenance of industrial gas burners should be conducted regularly to ensure their proper operation and production safety. When cleaning the burner, use professional cleaning agents and follow the instructions to avoid personal injury or equipment damage from improper use. Regularly replace the filter and Hamilton factor in the burner to ensure its smooth operation. Regularly check the burner's tightness to prevent safety hazards caused by loosening.

 Maintenance overhaul

Check gas ventilation

When using the gas burner, check the gas supply to ensure that the gas supply is normal. If the burner does not ignite or has no gas, check whether the solenoid valve and ball valve are open, whether the power supply is on, and whether the igniter is damaged.

Check gas lines

Check the natural gas supply pipeline for aging, rupture, damage and other phenomena regularly. Once found, it must be dealt with in time and the prevention of natural gas leakage should be done carefully. The service life of rubber hose shall not exceed 18 months.

 Troubleshooting

Burner fault handling

If the burner is faulty, such as not firing or not passing gas, it needs to be checked and handled according to certain steps. This includes checking the gas flow, whether the solenoid valve and ball valve are open, whether the power supply is on, and whether the igniter is damaged.

Emergency management

If you smell an odor, it may be a gas leak. At this time, you should immediately open the doors and Windows for ventilation, close the gas valve, and contact the relevant personnel. Do not operate electrical switches, telephones or other equipment that may produce sparks to avoid causing fire or explosion.

 Matters need attention

Prevent gas leakage

When using a gas burner, special attention should be paid to prevent gas leakage. Once gas leakage is found, measures should be taken immediately, such as closing the gas valve, opening doors and Windows for ventilation, and contacting professionals for maintenance.

Avoid static electricity or sparks

Knocking or colliding a wrench or metal rod on the gas supply pipe of the burner may cause static electricity or sparks, which may lead to gas explosion. Therefore, such behavior should be avoided during operation.

Illegal operations are prohibited

Smoking, welding, cutting and other illegal operations are strictly prohibited in the gas supply valve group or pipeline flange surface to prevent safety accidents.

By following the above points of attention, the safe use of gas burner can be effectively guaranteed and the risk of accidents can be reduced.