Equipment selection and installation

Choose high quality products: Select the burner ignition controller with advanced electronic technology and reliable mechanical structure, which has the characteristics of high reliability, flexibility and safety, and can lay the foundation for safe and stable operation.

Correct installation and debugging: The installation process should be carried out in strict accordance with the instructions to ensure that all parts are firmly connected and the lines are correctly connected. After the installation is completed, a comprehensive debugging should be carried out to ensure that all functions of the controller are normal and that flame monitoring, automatic ignition and other functions are accurate.

Operation standards and personnel training

Professional operation: Operators must be specially trained, familiar with the working principle and operation process of the burner ignition controller, and master relevant safety knowledge. For example, personnel operating the fuel burner ignition transformer should understand its working principle and operation process, master safety knowledge, and avoid accidents caused by improper operation.

Follow operating procedures: Operators must strictly adhere to the operating procedures and are prohibited from arbitrarily changing or skipping any steps. Before operation, check if the equipment is in normal working condition; if any abnormalities are detected, report them promptly. During operation, remain vigilant and observe the equipment's performance; if any issues arise, address them immediately.

Protective equipment: Operators should wear personal protective equipment in accordance with the requirements during operation, such as fireproof clothing, protective gloves, etc., smoking, open flame or items that are easy to generate static electricity are strictly prohibited to reduce safety risks.

Daily maintenance and maintenance

Periodic inspection: Regularly check the burner ignition controller, including whether the equipment appearance is damaged, whether the wiring is aging, whether the connection is loose, etc. At the same time, check whether the normal working indicator light of the ignition transformer is on, to ensure that the equipment is in normal working state.

Cleaning and Maintenance: Keep the burner ignition controller clean, promptly remove dust, oil, and other impurities from its surface to prevent them from entering the equipment and affecting normal operation. For key components such as proportional valves, regularly clean the valve guide sleeve to ensure that the valve opens quickly, guaranteeing the stability of ignition and flame adjustment.

Part replacement: For some vulnerable parts, such as ignition controller and proportional valve diaphragm, it is necessary to replace them in time according to the use situation to avoid equipment failure caused by aging or damage of parts.

Troubleshooting and handling

Timely Fault Diagnosis: When the burner ignition controller fails to ignite or does not produce a strong flame, it should be promptly diagnosed. For instance, if the gas burner and the ignition controller themselves are found to be in good condition but the ignition gap is unstable, the ignition gap can be readjusted by rewelding. If the proportional valve opens with a delay, the valve guide sleeve can be cleaned to resolve issues with ignition and flame adjustment.

Contact professional maintenance: If you encounter complex faults or problems that cannot be solved by yourself, you should contact the supplier or professional maintenance personnel for maintenance in time. Do not change or repair the equipment without authorization, so as to avoid more serious damage.

safety precautions

Flame monitoring: The burner ignition controller should have real-time flame monitoring function, which can detect the flame status in time. Once the flame goes out or there is an abnormality, the controller can quickly cut off the fuel supply to prevent gas leakage and ensure safety.

Multiple security protection: a variety of security protection measures are adopted, such as overvoltage protection.