AFC 50 Linear Control Valve for Efficient Gas/Cold Air Flow Adjustment Industrial burner

HOME >> Gas Solenoid valve >> AFC 50 Linear Control Valve for Efficient Gas/Cold Air Flow Adjustment Industrial burner

❤ Add to collection
AFC 50 Linear Control Valve for Efficient Gas/Cold Air Flow Adjustment Industrial burner

Overview
The linear flow control valve AFC is used to regulate the flow of fuel and cold air on various equipment. It regulates the control of Prida 25:1. It is equipped with our company’s AT31,AT50 and other actuators, which is suitable for remote flow regulation or stage control of combustion process.
Features
● There is a linear relationship between the regulating angle of AFC linear valve and gas flow rate.
● The adjustment range can be up to 25:1.
● Threaded linear valve can be used in all kinds of gas and room temperature air.
● It adopts automatic control mode and can be customized according to the needs of users
● Flanged linear valves can be used for cold or hot air.
Precautions for Installation and maintenance of AFC Linear Valve
● To ensure the normal and safe operation of the valve and a long service life, consider the following

recommendations when designing the combustion system:
●
Ensure that all functions of the system comply with valve specifications (gas type, working pressure, flow rate,
ambient temperature, voltage, etc.).
● According to the required installation position, it should be in the vertical position or tilted upward to the
horizontal position with the actuator, and shall not be inverted.
● In the case of vertical pipes, the flow direction should be from bottom to top.
● A fer removing the end cover, make sure that no foreign body enters the valve (such as chips or excessive
sealants) during handling or installation.
●A gas filter should always be installed upstream of the valve.
●It should be ensured that the installation area is protected from Rain Water and water splashing or falling
● Perform leak and functional tests after installation(maximum test pressure is 1.5 Pmax)
● For corrosive gases, maintenance must be carried out at least once a year
● It should be ensured that all work is carried out only by qualified technical personnel and complies with local
and national regulations.
● In order to prevent product damage and dangerous conditions please read the instructions provided with the
product carefully before installation.
● The maintenance cycle is once a year,and the number of maintenance is increased as appropriate.
- Price：￥0.00
  
  List price：￥0.00
  
  MemberPrice：
  Ordinary：￥0.00
  
  VIP：￥0.00
  
  Distribute
- Satisfaction：
  
  Sales： 0
  
  Review： 0
Weight：0.000KG
- Quantity：
- Add to cart
  
  Buy now

Description

Overview

The linear flow control valve AFC is used to regulate the flow of fuel and cold air on various equipment. It regulates the control of Prida 25:1. It is equipped with our company’s AT31,AT50 and other actuators, which is suitable for remote flow regulation or stage control of combustion process.

Features

● There is a linear relationship between the regulating angle of AFC linear valve and gas flow rate.

● The adjustment range can be up to 25:1.

● Threaded linear valve can be used in all kinds of gas and room temperature air.

● It adopts automatic control mode and can be customized according to the needs of users

● Flanged linear valves can be used for cold or hot air.

Precautions for Installation and maintenance of AFC Linear Valve

● To ensure the normal and safe operation of the valve and a long service life, consider the following

recommendations when designing the combustion system:

●

Ensure that all functions of the system comply with valve specifications (gas type, working pressure, flow rate,

ambient temperature, voltage, etc.).

● According to the required installation position, it should be in the vertical position or tilted upward to the

horizontal position with the actuator, and shall not be inverted.

● In the case of vertical pipes, the flow direction should be from bottom to top.

● A fer removing the end cover, make sure that no foreign body enters the valve (such as chips or excessive

sealants) during handling or installation.

●A gas filter should always be installed upstream of the valve.

●It should be ensured that the installation area is protected from Rain Water and water splashing or falling

● Perform leak and functional tests after installation(maximum test pressure is 1.5 Pmax)

● For corrosive gases, maintenance must be carried out at least once a year

● It should be ensured that all work is carried out only by qualified technical personnel and complies with local

and national regulations.

● In order to prevent product damage and dangerous conditions please read the instructions provided with the

product carefully before installation.

● The maintenance cycle is once a year,and the number of maintenance is increased as appropriate.

Product Parameter
Product Structure:	Internal thread connection, Fanged connection;
Working medium:	Air, gas, liquefied petroleum gas, Natural gas and other non-corrosive gases (Flanged linear valve only adapts to air);
Operating temperature:	Internal thread connection:-15°C~60°C; Flanged connection:-15°C~300°C
·Maximum inlet pressure:	500mbar;